$10,500 0 Land Pride RC3715

$15,000 0 Land Pride RC3715

$15,900 0 Land Pride RC3715

$19,900 2024 Land Pride RC3715

$21,000 2020 Land Pride RC3715

Batwing: Yes

Blade Tip Speed: 15578

Cutting Capacity: 3

Cutting Height: 1.5

Deck Thickness: 10 Gauge

Deck Thickness Wings: 10 Gauge

Drive Line Protection: Slip Clutch

Front Guards: Chain

Gear Box Rating Center: 130

Gear Box Rating Outerwing: 130

Gear Box Rating Splitter: 160

Guards: Chain

Min Tractor PTO Horsepower: 50

Mower Type: Pull-Type

Num Blades: 6

Num Gear Boxes: 4

Num Tail Wheels: 6

PTO: 1000

Safety Lights: Yes

Stump Jumper: Yes

Swivel Hitch: Yes

Tail Wheel Type: Airplane

Width: 15

NEW, IN STOCK Land Pride RC3715 15' Batwing Cutter, Call for Special Financing. Factory Secs listed below:
Land Pride's RC3715 (RCM3715) is identical to the RC3712, simply 3 feet wider. The tire offering on the RC3715 is expanded to 4, 6, or 8 tires in 4 sizes, including our new 26" laminated tire. Deck rings are available as well as fold options that allow for narrow transport or independent control of the wings. Also available as an RCG3715 model that offers a hot-dipped zinc galvanized deck.

FEATURES
GEARBOX WARRANTY
5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

3" CUTTING CAPACITY
These cutters offer 3" cutting capacity. See Operator's Manual for more information.

OPTIONAL LP PERFORMANCE HITCH
Clevis swivels two ways: Cutter can swivel clockwise and counterclockwise about tractor drawbar up to 12° in either direction.

ADJUSTABLE JACK ANGLE
Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS
LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES
Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

3/16" STUMP JUMPER
Standard 3/16" thick stump jumper material keeps damage to a minimum.

AVAILABLE COLORS
Tan, orange, red, yellow or green to match popular tractor lines.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Technical Data
Horsepower Range
50 - 160
Gearbox Horsepower
540 rpm (RC) or 1000 rpm (RCM) | 160 hp Divider and 130 hp Center & Wings
Gearbox Lubrication
Gear Lube 80-90W EP
Gearbox Oil Capacity
Splitter: 3.5 pints; Center deck & Wings: 6 pints
Cutting Capacity
3"
Total Machine Weight
4,380 lbs.
Tongue Weight
1,594 lbs.
Blade Tip Speed
RC 540 rpm: Center Blades = 15,268 FPM & Wing Blades = 15,000 FPM | RCM 1000 rpm: Center Blades = 15,578 FPM & Wing Blades = 14,620 FPM
Hitch Types
Fixed Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch Jack
Standard 7,000 lbs.
Signal lights
LED
7 Pin connector
SAE J560 pin configuration
Cutting Width
15’-0"
Overall Width
15’-10"
Transport Width w/ 21" tires
10’-3" (Single acting fold option) 7’-3" (Dual acting fold option)
Overall Length
16'-3" (With center deck raised fully up)
Deck Height
12"
Cutting Height
1-1/2" - 16" (Varies by tire option)
Lift Hydraulics
3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics
2 1/2" x 12" hydraulic cylinders, hoses & fittings
Wing Transport Protection
Wing Transport Lock Pins
Deck Material Thickness
10 Gauge
Side Skirt Thickness
1/4" Steel
Skid Shoes
Wing Deck: 1 Replaceable skid shoe per wing | Center Deck: 2 Replaceable skid shoes
Blades - 6 (2 per Carrier)
1/2" x 4" Heat-treated, free-swinging alloy steel with uplift
Blade Overlap
6"
Blade Bolt
Keyed with hardened flat washer & locknut
Stump Jumper / Blade Holder
3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
Front & Rear Guards
Optional single row chain or dual row chain
Input Driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Intermediate Driveline
Standard - Category 4 with slip-clutch
Wing Drivelines
Standard - Category 4 with slip-clutch or Category 5 with slip-clutch
Wheel Options
21" or 26" Laminated tires | 25.5" New foam filled tires | 25.5" New 20-ply pneumatic tires | 29" Used aircraft tires
Number of Wheels
4 - Wheels: Two on transport axle and one on each wing axle | 6 - Wheel option: Four on transport axle and one on each wing axle | 8 - Wheel option: Four on transport axle and two on each wing axle
Transport Axle
Spring-cushioned on center transport axle
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
LP Performance hitch & Bar-tite hitch pivot shaft diameter
2 1/4"
A-frame tongue
5" x 3" rectangular tubing