Don’t miss out on price changes! Save a listing and automatically get emailed when there is a price change.
Seller
Shipping
It's easy to get a shipping quote! Just click the button below and complete the short form.
See other Hustler Super 104s
$15,000
2015 Hustler Super 104
$19,500
2015 Hustler Super 104
$28,700
2024 Hustler Super 104
Key Specifications
Hours:
398
Detailed Specifications
Serial #:
15065047
Seller Comments
The Super 104 is an affordable wide-area mower with the maneuverability of a zero-turn; Features include premium Kawasaki engine, 104" cutting width, Hyper-Drive System, Grammer premium suspension seat (standard), simple, service friendly design, and hydraulic wing deck lift. The Super 104 can mow up to 84 acres in 8 hours at 17km/h and will mow where most wide-area mowers cannot.
Engine: Kawasaki FX1000V
HP: 35.0 hp (26.1kW) @ 3600 RPM engine speed
Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
Starter: 12-volt (see engine manufacturers specifications)
Ignition: Electronic
Charging System: 12-volt (see engine manufacturers specifications)
Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
Fuel: Unleaded fuel (see engine manufacturer's specifications)
Fuel Capacity: 45.4 L (12 US gal)
Fuel Filter: Replaceable, automotive-type
Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
Cooling: Air cooled. Flywheel fan
Governor: Mechanical
PTO Clutch: 250 ft lbs
Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 15W50 Mobil 1 synthetic motor oil. Transmission drive (oil) cooler for increased system life.
Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel. Sauer Danfoss DDC-20
Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
Drive Cooling: Large capacity cooler with 9" (228.6 mm) fan for extended hydraulic life.
Drive Filter: Internal
Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG0360 with hot oil shuttle.
Ground Speed - Forward: Infinitely variable 0-17.7 kph (0 - 11 mph)
Ground Speed - Reverse: 0-12.07 kph (0-7.5 mph)
Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in park position, integral park brakes are automatically engaged.
Caster Tyres: 15 x 6.0 - 6, rib tread
Tyres - Drive: 26 x 12 - 12, turf tread
Hydraulic Capacity: Oil - 11.36 L (3 US gal)
Weight: 1065.9 kg (2350 lbs)
Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
Seat: Grammer suspension seat with isolator platform.
Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are .5" (12.7 mm) steel.
Hour Meter: Standard
ROPS: Standard foldable ROPS with seatbelt.
Seat Suspension: Standard
Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
Indicators: Hour meter, engine warning light.
Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
Width: With wings down: 106.1" (2695 mm) With wings up at gauge wheels: 80.0" (2032 mm) With wings up at deck base: 72.5" (1842 mm)
Width (tyre-to-tyre): 60.3" (1532 mm)
Deck System: Rear-Discharge: 104" cut deck. Free-floating deck using five blades. Centre deck is suspended at the corners, houses three blades and includes five deck mounted adjustable anti-scalp rollers. Two wing decks house one blade each and are attached to the centre deck with pivoting mounts. Outside of wings are suspended with adjustable casters and have one adjustable anti-scalp wheel each.
Cutting Widths: 104" Rear Discharge.
Deck Lift: Hydraulic powered deck and wing lift. Raise and lower deck from driver's seat with simple foot-operated deck height switch. Pin for setting height, transport position. Change cutting heights, climb curbs and trailer more easily. Raise and lower deck wings with a hand operated switch on the instrument panel.
Deck Construction: Welded steel. Solid 1.5" x .375" (38 mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Gusset style box section reinforces front edges. Reinforcements welded onto spindle mount areas.
Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
Blade(s): (5) Heavy-duty, heat treated, low-lift steel Fusion blades
1 x 23.86" x 2.50" x .203" CW cut 1 x 23.86" x 2.50" x .203" CCW cut 1 x 20.50" x 2.50" x .203" CW cut 2 x 20.50" x 2.50" x .203" CW cut
Blade Tip Speed: 15,800 fpm
Blade Drive: Belt drive from engine with electric clutch to centre deck spindle. Belt drive from centre deck outer spindles to each wing. Spring tension idler and large pulleys to extend belt life.
Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
Engine: Kawasaki FX1000V
HP: 35.0 hp (26.1kW) @ 3600 RPM engine speed
Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
Starter: 12-volt (see engine manufacturers specifications)
Ignition: Electronic
Charging System: 12-volt (see engine manufacturers specifications)
Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
Fuel: Unleaded fuel (see engine manufacturer's specifications)
Fuel Capacity: 45.4 L (12 US gal)
Fuel Filter: Replaceable, automotive-type
Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
Cooling: Air cooled. Flywheel fan
Governor: Mechanical
PTO Clutch: 250 ft lbs
Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 15W50 Mobil 1 synthetic motor oil. Transmission drive (oil) cooler for increased system life.
Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel. Sauer Danfoss DDC-20
Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
Drive Cooling: Large capacity cooler with 9" (228.6 mm) fan for extended hydraulic life.
Drive Filter: Internal
Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG0360 with hot oil shuttle.
Ground Speed - Forward: Infinitely variable 0-17.7 kph (0 - 11 mph)
Ground Speed - Reverse: 0-12.07 kph (0-7.5 mph)
Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in park position, integral park brakes are automatically engaged.
Caster Tyres: 15 x 6.0 - 6, rib tread
Tyres - Drive: 26 x 12 - 12, turf tread
Hydraulic Capacity: Oil - 11.36 L (3 US gal)
Weight: 1065.9 kg (2350 lbs)
Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
Seat: Grammer suspension seat with isolator platform.
Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are .5" (12.7 mm) steel.
Hour Meter: Standard
ROPS: Standard foldable ROPS with seatbelt.
Seat Suspension: Standard
Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
Indicators: Hour meter, engine warning light.
Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
Width: With wings down: 106.1" (2695 mm) With wings up at gauge wheels: 80.0" (2032 mm) With wings up at deck base: 72.5" (1842 mm)
Width (tyre-to-tyre): 60.3" (1532 mm)
Deck System: Rear-Discharge: 104" cut deck. Free-floating deck using five blades. Centre deck is suspended at the corners, houses three blades and includes five deck mounted adjustable anti-scalp rollers. Two wing decks house one blade each and are attached to the centre deck with pivoting mounts. Outside of wings are suspended with adjustable casters and have one adjustable anti-scalp wheel each.
Cutting Widths: 104" Rear Discharge.
Deck Lift: Hydraulic powered deck and wing lift. Raise and lower deck from driver's seat with simple foot-operated deck height switch. Pin for setting height, transport position. Change cutting heights, climb curbs and trailer more easily. Raise and lower deck wings with a hand operated switch on the instrument panel.
Deck Construction: Welded steel. Solid 1.5" x .375" (38 mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Gusset style box section reinforces front edges. Reinforcements welded onto spindle mount areas.
Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
Blade(s): (5) Heavy-duty, heat treated, low-lift steel Fusion blades
1 x 23.86" x 2.50" x .203" CW cut 1 x 23.86" x 2.50" x .203" CCW cut 1 x 20.50" x 2.50" x .203" CW cut 2 x 20.50" x 2.50" x .203" CW cut
Blade Tip Speed: 15,800 fpm
Blade Drive: Belt drive from engine with electric clutch to centre deck spindle. Belt drive from centre deck outer spindles to each wing. Spring tension idler and large pulleys to extend belt life.
Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
Price History
Avg Auction
(last 365 days)
Low
High
Current
Dealership listing provided via
Robinson Implement