New Virnig SWP108 108" snow pusher with pull back option. Recommended for loaders with operating capacities greater than 1,800 pounds. Equipped with 1 1/2" X 10" reversible replaceable rubber edge. 3" of wear per side of rubber edge. Floating side plates allow pusher weight to be transferred onto the edge. Heavy duty fame with +/- 4 degrees of oscillation helps edge stay in contact with surface being cleared. Floating ram link compensates for edge wear. Edge never requires adjusting, only needs to be reversed or replaced. Pull back equipped with 1 1/2" X 10" reversible, replaceable rubber edge -- same part that is used on the snow pusher. 3" of wear per side of rubber edge. Design allows for down pressure on the rubber edge. Includes all required hardware. Pusher weighs about 1,395 pounds and pull back weighs about 255 pounds, for a total weight of about 1,655 pounds. Lists @ $7,610. Other sizes/models are available. Note: This snow pusher has been sold, but please call for current price and availability of a new unit.