$3,750 0 Land Pride RBT3596

$4,349 2022 Land Pride RBT3596

$4,425 0 Land Pride RBT3596

$4,425 0 Land Pride RBT3596

$4,425 0 Land Pride RBT3596

New Land Pride RBT3596 8' Rear Blade, Hydraulic Angle, Mechanical Tilt and Offset. FActory Specs :
RBT3596 — REAR BLADES

Land Pride's RBT35 Series Blades are an excellent choice for leveling, finish grading, and backfilling applications at large feedlots, outdoor arenas, construction sites, nurseries, and maintenance operations on farms, ranches, or homeowner lanes or roadways. They are excellent for snow removal in the pulling or the push-blade mode. Their hydraulic or manual angle, offset, and tilt capability make them ideal for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.

FEATURES
WARRANTY
One year parts & labor. See warranty page for complete details.

84" & 96" WORKING WIDTHS
Choice of two sizes to pick from. Both sizes handle large capacities.

35 TO 80 HP RANGE FOR 2-WHEEL DRIVE. 35 TO 65 HP RANGE FOR 4- WHEEL DRIVE
Fits a wide variety of tractors.

CAT. 1 OR 2
Fits wide variety of tractors.

FITS LAND PRIDE QUICK-HITCH
Quick and easy attaching without leaving tractor seat.

3-WAY BLADE
Tilt, angle and offset features available hydraulically or manually.

FULLY WELDED MAIN FRAME (TUBULAR CONSTRUCTION)
Fully welded adds overall strength and rigidity to blade frame.

HEAVY-DUTY PIVOT ASSEMBLY WITH 3” SOLID STEEL KINGPIN
3/4” Plate steel turntable and 3” kingpin for handling the high amount of torque that can be transferred to this area.

FORMED 17 INCH MOLDBOARD
Precisely formed moldboard rolls dirt and debris with ease.

5/16” MOLDBOARD THICKNESS WITH BOX REINFORCEMENT
Thick material with fully welded box reinforcement creates a strong moldboard.

REVERSIBLE CUTTING EDGE
Get twice the wear from the cutting edge by flipping it over.

RETRACTABLE PARKING STAND
Able to store the unit with the frame off the ground, also aids in attaching to tractor.

ACCESSORIES
END PLATES
End plates hold material in and allow it to be moved

SKID SHOES
Help protect from hitting low obstructions by keeping the moldboard off the ground.

CUSHION VALVE
Helps protect the moldboard and cylinders in the event an obstruction is hit by allowing hydraulic fluid to bypass the cushion valve and flow back towards the tractor.

AVAILABLE COLORS
Tan or orange to match popular tractor lines.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Technical Data
Blade Width
96" (2.44 m)
Approximate Weight (lbs.) with manual links
745 lbs (337.9 kg)
Maximum Tractor Horsepower
80 HP for 2 Wheel Drive and 65 HP for 4 Wheel Drive
Maximum G.V.W. (lbs.)
9500 lbs.
Hitch Type
Cat. 1 & 2 | Fits Land Pride Quick-Hitch
Blade Angle - Manual Linkage
With blade facing forward or reversed | Up to 40 degrees in 10 degree increments clockwise and counterclockwise*
Blade Angle - Hydraulic Cylinder
With blade facing forward or reversed | Up to 50 degrees clockwise and counterclockwise*
Angle Cylinder
3 1/2" bore X 14" stroke X 1 1/4" rod
Blade Offset - Manual Linkage
Up to 30 inches left and right in 9 positions (Center, 4 left and 4 right)
Blade Offset - Hydraulic Cylinder
Up to 30 inches left and right
Offset Cylinder
3 1/2" bore X 14" stroke X 1 1/4" rod
Blade Tilt - Manual Ratchet Jack
Maximum 20 degrees up and 20 degrees down with blade facing forward or reversed
Blade Tilt - Hydraulic Cylinder
Maximum 20 degrees up and 20 degrees down with blade facing forward or reversed
Tilt Cylinder
2" bore X 6" stroke X 1 1/4" bore
Moldboard King Pin
3" diameter
Moldboard Height
17" tall
Moldboard Thickness
5/16" reinforced, 3/16" tapered reinforcement channel
Cutting Edge
1/2" x 6" Heat treated, Replaceable & Reversible (Double bevel)
Main Frame Construction
Fully Welded Tubular Construction
Parking Stand
Retractable
Accessories
Manual or Hydraulic Single Gauge Wheel, Hydraulic Selector Valve and Cushion Valve