Used John Deere 8R 280 Tractors for Sale (174 listings)

Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h
24.9 mph
Optional: 16-speed PowerShift 40 km/h
e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr IVT 40K, 0.05-42 km/h
0.03-26 mph
John Deere AutoPowr IVT 50K, 0.05-50 km/h
0.03-31 mph

MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.

6,636 mm
261.3 in.

376 mm
14.8 in.

MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.

12 January 2022

727 L
192 U.S. gal.
CTIS: 651 L
172 U.S. gal.

42.3 L
11.2 U.S. gal.

1300 MFWD: 25.7 L
6.8 U.S. gal.
1500 MFWD: 27.6 L
7.3 U.S. gal.
ILS: 25.8 L

1300 MFWD: 180.7 L
37 U.S. gal.
1500 MFWD: 184.6 L
48.8 U.S. gal.
ILS: 207.2 L
54.7 U.S. gal.

37.2 L
9.8 U.S. gal.

Standard: Category 3
Optional: Category 4
Category 4 with heavy-duty support

Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb

Standard: 18 halogen
Available: 18 LED
22 LED

Standard: 200 amp
Optional: 330 amp

12 V

1,850 CCA

Standard: halogen, 65 W
Available: LED

10 percent

ECE-R120: 206 kW
280 hp

40 percent

At 1600 rpm: 1311 Nm
966 lb-ft

ECE-R120: 227 kW
308 hp

170 kW
228 hp

Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation

John Deere PowerTech 9.0 L (B20 diesel compatible)

In-line six, four valve

2100 rpm

9.0 L
549 cu in.

MJDXL09.0333

Final Tier 4

Wet-sleeve

Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)

Standard: 1300 Series MFWD
Optional: 1500 Series MFWD
ILS

1300 Series MFWD: Limited Slip
1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic

Category 3N

1,000 PTO rpm at 2000 engine rpm

Category 3N ground-engaging front hitch: 5200 kg
11,464 lb

44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)

Closed-center, pressure/flow compensated system with load sensing

Electronic

Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm

96 L/min
25 gpm

1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm

Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1

Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: 16-speed PowerShift 40 km/h
e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h
0.03-26 mph
John Deere AutoPowr IVT 50K, 0.05-50 km/h
0.03-31 mph

John Deere PowerTech™ 9.0 L (B20 diesel compatible)

ECE-R120: 206 kW
280 hp

MFWD/PowerShift: 11,700 kg
25,800 lb
ILS™/e23: 12,700 kg
28,000 lb

9.0 L
549 cu in.

ECE-R120: 227 kW
308 hp

170 kW
228 hp

Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm

Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitch point: 6350
14,000 lb
Optional: Category 3/3N at 610 mm (24 in.) behind hitch point: 8391 kg
18,500 lb
Category 4N/3 at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb

700M

USA

Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II

Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna

Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.

6.52 m²
70.18 sq ft

Optional

3.24 m³
114 cu ft

Standard

Integrated AutoTrac™

JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

JDLink hardware standard

Standard: Rack-and-pinion, double flat, or flange axles
Optional: Long, dual taper hub: Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.

Inboard planetary three pinion

Full-locking electrohydraulic

Electrohydraulic

Electrohydraulic

Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitch point: 6350 kg
14,000 lb
Optional: Category 3/3N at 610 mm (24 in.) behind hitch point: 8391 kg
18,500 lb
Category 4N/3 at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb

Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb

Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Electrohydraulic with adjustable modulation

16-speed PowerShift: 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, 540 PTO rpm at 1,817 engine rpm
IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm

Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable

500 hours

6,000 hours

1,500 hours

Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

1300 Series MFWD: 1524-2235 mm
60-88 in.
1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm

1300 with 480/70R30 Group 42 Tires at 153.7-cm (60.5-in.) spacing: 6.05 m
19.8 ft
1500 with 420/850R34 Group 43 tires at 182.9-cm (72-in.) spacing: 5.71 m
18.7 ft
ILS with 480/70R34 Group 43 tires at 184.2-cm (72.5-in.) spacing: 6.45 m
21.2 ft

Optional

MFWD/PowerShift: 11,700 kg
25,800 lb
ILS™/e23: 12,700 kg
28,000 lb

20,000 kg
44,100 lb

20,000 kg
44,100 lb