Used John Deere 7R 210 Tractors for Sale (47 listings)

Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23™ Transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)

2,925 mm
115.2 in.

5520 mm
217 in.

Group 47 rear tires: 360 mm
14.2 in.
Group 48 rear tires: 415 mm
16.3 in.

10-Jul-2020

e23™: 463 L
122 U.S. gal.
IVT: 513 L
135 U.S. gal.

39.5 L
10.4 U.S. gal.

26 L
6.9 U.S. gal.

160 L
42.3 U.S. gal.

26.2 L
6.9 U.S. gal.

Standard: Category 3
Optional: Category 3 with heavy-duty support
Category 4

Standard: Category 3: 1,837 kg
4,050 lb
Optional: Category 3 with heavy-duty support: 4,536 kg
10,000 lb

Standard: 18 halogen
Available: 18 LED or 22 LED

Standard: 210 amp
Optional: 250 amp

12 V

With two 925 CCA group 31 batteries: 1850 CCA

Standard: 65-W halogen
Available: LED

IPM: 23 kW
30 hp

ECE-R120: 154 kW
210 hp

40 percent

At 1600 rpm: 983 Nm
725 lb-ft

ECE-R120: 170 kW
231 hp

126 kW
170 hp

Single turbocharger, variable geometry turbo

John Deere PowerTech™ (B20 diesel compatible) 6.8L

Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head

2100 rpm

6.8 L
415 cu in.

MJDXL06.8309

Final Tier 4

Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)

Standard: 1150 Series MFWD: tread range 1524 to 2235 mm
60 to 88 in.
Optional: TLS: Tread range 1524 to 2235 mm
TLS with front brakes available with 40 km/h
24.9 mph
TLS with front brakes standard with 50 km/h
31 mph

1150 Series MFWD: Limited slip
TLS: Limited slip
TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)

Category 3N, ground engaging

1,000 PTO rpm at 1940 engine rpm

Seven-pin connector

5,200 kg
11,464 lb

Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)

Closed-center, pressure/flow compensated system with load sensing

Electronic

Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm

126 L/min
33 gpm

132 L/min
35 gpm

Standard: four SCVs
Optional: Three to six ISO couplers: 12.7 mm
1/2 in.
Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)

One with front hitch

Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)

John Deere PowerTech™ (B20 diesel compatible) 6.8L

ECE-R120: 154 kW
210 hp

e23, TLS™, 18.4R46: 10,000 kg
22,000 lb

6.8 L
415 cu in.

ECE-R120: 170 kW
231 hp

126 kW
170 hp

Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm

Standard: Category 3/3N with Quik-Coupler
Optional: Category 3/3N with hook ends

700M

4741 mm
186 in.

2417 kg
5304 lb

USA

Degree of seat swivel, left hand
Optional: 25 degree
Degree of seat swivel, right hand
40 degree
Standard: air suspension
Optional: ActiveSeat™ II

Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna

Standard: 4200 Generation 4 CommandCenter™: 17.8 cm
7 in.
Optional: 4600 Generation 4 CommandCenter: 25.4 cm
10 in.

6.56 m²
70.61 sq ft

Optional

3.24 m³
114 cu ft

Standard

Integrated AutoTrac™

JDLink™

ServiceADVISOR™ Remote: available with JDLink hardware and activations
Remote Display Access: available with JDLink hardware and activations

Standard: Rack-and-pinion or flange axles
Optional: Diameter: 100 x 3010 mm
3.94 x 118.5 in.
Diameter: 100 x 2808 mm
3.94 x 110.5 in.
Diameter: 100 x 2550 mm
3.94 x 100.4 in.
Flanged Axle: 335 mm
13.2 in.

Inboard planetary three pinion

Full-locking electrohydraulic

Electrohydraulic

Standard: Category 3/3N with Quik-Coupler
Optional: Category 3/3N with hook ends

Standard (Category 3): 5443 kg
12,000 lb
Optional (Category 3N): 6894 kg
15,200 lb
Standard (Category 3 with hook ends): 5443 kg
Optional (Category 3 with hook ends): 6894 kg
15,000 lb

Independent
Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540E/1000/1000E rpm gearcase
44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540/540E/1000 rpm gearcase

Electric switch with adjustable modulation

540/1000 PTO rpm at 1950 engine rpm
540E/1000E PTO rpm at 1750 engine rpm

500 hours

6,000 hours

1,500 hours

Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump

RCI Group 47/48

380/85R34 group 42 tires at 152.4-cm (60-in.) spacing 1300: 7 m
23 ft
600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing TLS: 6.7 m
22 ft

e23, TLS, 18.4R46: 10,000 kg
23,000 lb

SAE PTO hp: 65.8 kg
145 lb