Give Feedback
You must enter a search term to perform a search.

Used Allis Chalmers 7010 Tractors for Sale (2 listings)

Filters / Sort
View: 24 36 48 72
Save your search and get daily updates on new inventory.
Save search
 Allis Chalmers 7010 100-174 HP
4 photos

Allis Chalmers 7010

Save
Call for price
Allis Chalmers 7010 2wd w/Cab/We are parting out/Engine has blow by.
Call for price
Southington, OH
(330) 462-7041
 Allis Chalmers 7010 100-174 HP

Allis Chalmers 7010

Save
Call for price
SALVAGE ONLY - CONTACT US FOR YOUR PARTS NEEDS
Call for price
Sharon Springs, NY
(518) 284-2090

Allis Chalmers 7010 Specs

Overview

Battery
Volts
12
Capacity
13 gal (49.2 L) (optional tank)
Fuel
54 gal (204.4 L)
Rear diff.
66.8 qts (63.2 L)
Electrical
Charging system
alternator
Hydraulics
13.5 gpm (51.1 lpm) (transmission)
Type
closed center
Valves
2
Pump flow
22 gpm (83.3 lpm)
Total flow
45 gpm (170.3 lpm)
Steering flow
9.5 gpm (36.0 lpm)
Mechanical
Cab
Accousta cab standard with heat. Optional air-conditioning, radio, and 8-track player. Four-post ROPS canopy optional.
Brakes
differential hydraulic wet disc
Chassis
4x2 2WD
Steering
hydrostatic power
Final drives
inboard planetary
Differential lock
power
Production
Factory
West Allis, Wisconsin, USA
Total built
2,436
Manufacturer
Allis Chalmers
Original price (USD)
$35,311
3-Point Hitch
Rear Type
III/II
Rear lift (at 24"/610mm)
6,680 lbs (3030 kg)
Dimensions & Tires
Weight
11260 to 12790 pounds
Rear tire
18.4-38
Wheelbase
106 inches (269 cm)
Front tire
10.00-16

7010 Serial Numbers*

*General guideline: If your serial number is in between two years, your tractor is the earlier year.
1979
1001
1980
1925
1981
2806
Final
3433
Location
Above PTO shield
Power Take-off (PTO)
Rear PTO
independent
Rear RPM
540 1000
Allis Chalmers 7010 Power
PTO (tested)
106.72 hp (79.6 kW)
Drawbar (tested)
89.10 hp (66.4 kW)

Engine

Engine Detail
301 ci (4.9 L), 6-cylinder, Allis Chalmers 649T, liquid-cooled inline, turbocharged diesel
Rated RPM
2300
Air cleaner
dual paper elements
Bore/Stroke
3.875x4.25 inches (98 x 108 mm)
Compression
16.25:1
Firing order
1-5-3-6-2-4
Oil capacity
20 qts (18.9 L)
Starter volts
12
Coolant capacity
26 qts (24.6 L)

Transmission

Transmission
Type
partial power shift
Gears
12 forward and 2 reverse, 16 forward and 4 reverse, 20 forward and 4 reverse
Speeds
With 15.5x38 rear tires., With 18.4x38 rear tires.
Oil capacity
29.6 qts (28.0 L)
Transmission
Allis-Chalmers Power Director, Allis-Chalmers Power Shift

Dimensions

Dimensions
118.7 inches (301 cm) (long axle)
Width
92.6 inches (235 cm)
Rear axle
3.625 inch diameter (92 mm)
Wheelbase
106 inches (269 cm)
Rear tread
64 to 89 inches (162 to 226 cm)
Front tread
60 to 88 inches (152 to 223 cm)
Height (hood)
68 inches (172 cm)
Height (exhaust)
116 inches (294 cm)
Weight (ballasted)
12,790 lbs (5801 kg)
Weight (operating)
11,260 lbs (5107 kg)
Clearance (rear axle)
28 inches (71 cm)
Clearance (front axle)
21 inches (53 cm)
Height (steering wheel)
87 inches (220 cm)
Allis Chalmers 7010 Tires
14L-16, 18.4-42, 18.4x16, 20.8-34, 20.8-38, 23.1-30, 30.5-32
Ag rear
18.4-38, 24.5-32
Ag front
10.00-16, 11.00-16

Tests

Nebraska Tractor Test 1345
Type
Diesel 20-speed 2WD
Test Date
May 1 - 13, 1980
Test report
PDF file
Max pull gear
1FL
Drawbar pull (max)
9,426 lbs (4275 kg)
Drawbar power (max)
87.83 hp (65.5 kW)
Drawbar fuel use (max)
7.0 gal/hour (26.5 l/hour)
PTO fuel use (PTO speed)
6.9 gal/hour (26.1 l/hour)
PTO fuel use (engine speed)
7.0 gal/hour (26.5 l/hour)
PTO power (rated PTO speed)
107.52 hp (80.2 kW)
PTO power (rated engine speed)
106.53 hp (79.4 kW)
Nebraska Tractor Test 1346
Type
Diesel 12-speed 2WD
Test Date
May 2 - 14, 1980
Test report
PDF file
Max pull gear
3S
Drawbar pull (max)
9,516 lbs (4316 kg)
Drawbar power (max)
89.10 hp (66.4 kW)
Drawbar fuel use (max)
7.2 gal/hour (27.3 l/hour)
PTO fuel use (PTO speed)
6.9 gal/hour (26.1 l/hour)
PTO fuel use (engine speed)
7.0 gal/hour (26.5 l/hour)
PTO power (rated PTO speed)
106.33 hp (79.3 kW)
PTO power (rated engine speed)
106.72 hp (79.6 kW)
This data is sourced from the public domain and Machinery Pete cannot guarantee accuracy.