Yanmar 424 Tractor

Contact Seller
Jared Kreger
New Ringgold, Pennsylvania

Eckroth Equipment Company - New Ringgold
New Ringgold, Pennsylvania

See other Yanmar 424s
$22,600 2018 Yanmar 424

Base Specifications

Key Specifications
Drive: 4 WD
HP: 24
Hours: 1

Detailed Specifications
Stock #: 544790
Serial #: 400608

Seller Comments
Some of the most beautiful land features rolling hills, steep slopes and challenging terrain. If you work that type of land, the 424 is the right tractor for you. With a larger tire package, the 424 provides greater ground clearance along with enhanced stability. This model features features the YL210 Loader and B65 Backhoe package. Powertrain •Battery: 540 CCA •Bore and Stroke in. (mm): 3.15x3.30 in. (80x84 mm) •Cooling system: Water cooled •Fuel: Diesel •Gross Power: 23.9 HP (17.8 kW)* •Maker: Yanmar •Maximum Torque ft.lbs. (Nm): 45.7 ft.lbs (62.0 Nm) •Model: 3TNV80F •Number of cylinders: 3 •PTO Power at Zero Speed: 21.7 HP (16.2 kW) •Rated RPM: 3,200 RPM •Total displacement: 77.2 cu. In. (1.266 L) •Type: 24 Engine Horsepower* Diesel Tractor Capacities •Engine Coolant: 3.0 qt. (2.8 L) •Engine Oil: 3.6 qt. (3.4 L) •Front Axle Oil: 0.92 gal. (3.4 L) •Fuel tank: 6.1 gal. (23.0 L) •Transmission Oil: 4.1 gal. (15.5 L) Drivetrain •2WD/4WD engagement: Selectable •Brakes: Wet disc •Transmission type: Hydrostatic, 2 Range Speeds Hydraulics •3-point hitch: Limited Category 1 •3-point lift capacity at 24" (61cm): 1,209 lbf. (548 kgf) •4-way loader control valve: Standard •Hydraulic Control System: Position Control, Open Center •Power steering: Fully Hydraulic •Pump capacity (implement) @ Rated: 3.7 GPM (14.1 L/min) •Pump capacity (steering) @ Rated RPM: 4.3 GPM (16.1 L/min) •System Pressure psi (MPa): 2,439 psi (16.7 MPa) Dimensions •Ground Clearance (with R4 Tires): 9.8" (249 mm) •Minimum Turning Radius ft. (m): 8.5 ft. (2.6 m) •Overall Height (with Folded ROPS, R4 Tires): 71.8" (1,824 mm) •Overall height (with R4 Tires): 87.2" (2,215 mm) •Overall Height (with R4 Tires, Top Of Steering Wheel): 56.7" (1,440 mm) •Overall length (with 3PH and R4 Tires): 105.8" (2,688 mm) •Weight (with ROPS, R4 Tires, Full Fluid): 1,830 lbs. (830 kg) •Wheelbase: 63.0" (1,600 mm) •Width (with R4 Tires): 54.1" (1,373 mm) Tire Size •Industrial (R4) - Front: 23 x 8.50-12 4PR •Industrial (R4) - Rear: 14-17.5 6PR Traveling Speeds •Forward (with R1 Tires): mph (kmh) Low: 0-6.3 (0-10.0), High: 0-13.1 (0-21.0) •Reverse (with R1 Tires): mph (kmh) Low: 0-4.3 (0-7.0), High: 0-9.1 (0-14.7) PTO •Mid Shaft: SAE16/32, 15 Splines •Mid Speed/Engine RPM: 2,057/3,200 •Mid Type: Independent •Power Take Off (PTO) Power HP (kW): 18.1 HP (13.5 kW) •Rear Shaft Size: 35 mm OD, 6 Splines •Rear Speed/Engine RPM: 554/3,200 •Rear Type: Independent •Type: Hydraulic Clutch Warranty •Attachments: 1-year limited warranty •Power train (Engine and transmission core components): 5 years or 2,500 hours •Tractor (Private Individual Usage): 24 months or 2,000 hours Yanmar YL210 Curved Boom Loader Specifications •Maximum Lift Height to Pivot Pin in. (mm) 79 (2,000) •Maximum Lift Height Under Level Bucket in (mm) 58 (1,465) •Reach at Maximum Lift Height in. (mm): 36 (920) •Reach with Bucket on Ground in (mm): 53 (1,355) •Digging Depth in. (mm): 3.9 (100) •Maximum Drop Angle degree: 45 •Maximum Rollback Angle degree: 30 •Lift Capacity (Pivot Pin) lb. (kg): 1,199 (545) •Breakout Force (Pivot Pin) lb. (kg): 2,090 (950) •Rollback Force (Ground Line) lb. (kg): 1,518 (690) •Rated Flow GPM (L/m): 4.3 (16.1) •System Pressure psi (MPa): 2,429 (16.7) •Rising Time to Full Height w/o Load sec.: 3.7 •Lowering Time w/o Load sec: 2.3 •Attachment Rollback Time sec.: 2.3 •Attachment Dumping Time (REGEN) sec.: 1.6 •Bucket Width in. (mm): 53 (1,346) •Bucket Capacity cu ft. (m3): 5.65 (0.16) •Bucket Weight lb. (kg): 136 (62) Yanmar B65 Backhoe Specifications •Maximum Digging Depth in. (mm): 76.5 (1,943.1) •SwingArc: 150 degrees •Loading Height (bucket at 60 deg) in. (mm): 60 (1,524) •Reach from Center Line of Swing Pivot in. (mm): 104 (2,641.6) •Bucket Rotation: 180 degrees •Loading Reach (bucket at 60 deg) in. (mm): 33 (838.2) •Transport Overhang in. (mm): 37 (939.8) •Undercut in. (mm): 17 (431.8) •Stabilizer Spread, down position in. (mm): 74 (1,879.6) •Stabilizer Spread, up position in. (mm): 58 (1,473.2) •Bucket Cylinder Digging Force lbs. (kg): 2,036 (923.5) •Dipperstick Cylinder Digging Force lbs. (kg): 1,187 (538.4) •Hydraulic Volume Requirements gpm (lpm): 2-4 (7.57-15.14) •Hydraulic Pressure Requirements psi (kg/cm): 2,000 (140.65)
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Dealership listing provided via