Saved (0)

Massey Ferguson 1726E Tractor | Call for price

Contact Information
Gavin Grim
Orefield, PA
Email Seller

Orefield, PA

Base Specifications

Key Specifications
Drive: 4 WD
HP: 24

Detailed Specifications
Stock #: 542684
Serial #: HKL20907

Seller Comments
Features Innovation: Every Massey Ferguson is chock full of innovation, and the 1726E is no exception. These 4WD tractors with standard rear 540 PTO and 3-point hitch deliver more than you'd expect from economy models. Capability: Whether you've got a small farm or a busy job site, the 1726E is equipped with all the basics you need. And then some. Comfort: The E stands for economy, efficiency, and just plain easy. This is where the simplicity of this machine really works in your favor. Engine Rated Engine HP (kW): 24.0 (17.9) Rated engine speed (RPM): 2,600 Rated PTO HP (gear) (kW): 20.4 (15.2) Rated PTO HP (HST) (kW): 19.2 (14.3) Type: 3-cylinder diesel, liquid-cooled, Tier 4 Final Displacement L (in.3): 1.5 (91.5) Air and fuel systems: Indirect low-pressure injection, electronic engine management Emissions control: Internal exhaust gas recirculation (iEGR) Drivetrain Hydrostatic transmission: 3 range HST, heel-toe foot pedal on RH side, clutch pedal on LH side Brakes: Internal wet brakes, single brake pedal on HST, two brake pedals on gear models Rear axle: Drop-axle type with bull gear final drives Differential lock: Mechanical engagement via heel pedal Front axle: Cast steel 4WD front axle with center drive line and bevel-gear final drives 4WD engagement: Mechanical via push-pull lever in platform in front of seat Hydraulics Hydraulic system: Open center system, gear-type pump supplies implements and 3-point hitch Hydraulic flow @ remotes gpm (lpm); opt. up to 2: 6.7 (25.5) Loader joystick: Field-installed with loader only, joystick attaches to loader mount 3-point lift capacity lbs. (kg.): 1,600 (725) @ 24" Rear PTO: 540 RPM 1-3/8" 6-spline shaft Rear PTO type: Transmission driven Mid PTO: None Operator's Area Platform features: Straddle-mount, perforated steel deck, left-side entry with grab handle, steel fenders, folding ROPS, fuel tank under platform Hood type: Steel, locking with lift mechanism Seat and steering: Suspended vinyl seat with retractable seatbelt, fixed steering wheel Dimensions Overall length in. (mm): 116 (2,960) without 3-point linkage Wheelbase in. (mm): 65.9 (1,675) Overall width in. (mm): 52.4 (1,330) Height over ROPS w/R1 ag tires in. (mm): 97.6 (2,480) ROPS upright, 63.8 (1,620) ROPS folded ROPS base weight without ballast lbs. (kg.): Gear: 2,600 (1,180) HST: 2,657 (1,205) Fuel capacity gal. (L): 10 (38) L105E Loader Specs: (60"skid steer bucket) Our new high-performance loaders for Massey Ferguson subcompact and compact tractors are designed to get more work done with less. In addition to high lift capacity, we have optimized loader efficiency with fast cycle times and protected hydraulic lines by routing them inside the loader frame. From streamlined functionality to smart details, Massey Ferguson front loaders offer a unique combination of design, performance, and affordability. Features Hydraulic lines routed inside loader frame for protection and visibility Positive locking galvanized steel bushings at all pivot points to minimize wear Recessed grease zerks to minimize accidental damage Industry leading cycle times for performance and efficiency Quick-connect hydraulic lines Built-in parking stands One piece main frame with tapered arms and single cross member Loader frame pedestal mounted joystick Skid steer or pin-type implement attachments Specifications Lift Height @ Pivot Pin (in): 95.7 (2,400) Lift Capacity to Max. Height @ Pivot Pin lbs (kg): 1,210 (549) Breakout Force at bucket edge lbs (kg): 1,460 (660) Max Rollback Angle: 25° Compatible Tractor Models: All 1700E Series

Dealership listing provided via Sh logo