$14,500 2020 Land Pride RC3712

$24,980 2022 Land Pride RC3712

Call for price 2022 Land Pride RC3712

Call for price 2022 Land Pride RC3712

Batwing: Yes

Blade Tip Speed: 15700

Cutting Capacity: 3

Cutting Height: 1.5

Deck Thickness: 10 Gauge

Drive Line Protection: Slip Clutch

Front Guards: Chain

Gear Box Rating Center: 130

Gear Box Rating Outerwing: 130

Gear Box Rating Splitter: 160

Guards: Chain

Min Tractor PTO Horsepower: 50

Mower Type: Pull-Type

Num Blades: 6

Num Gear Boxes: 4

Num Tail Wheels: 6

PTO: 1000

PTO Size: 1 3/8

Safety Lights: Yes

Stump Jumper: Yes

Swivel Hitch: Yes

Tail Wheel Type: Laminated

Width: 12

New, IN STOCK Land Pride RC3712 12' Batwing Cutter, Call for Special Pricing and Finance.. Spec Information Below::
Land Pride's RC3712 (RCM3712) Folding Rotary Cutter features a 3" cutting capacity with a cut height of 1.5" to 14". The input driveline is a constant-velocity, Cat. 6 with Cat. 4 wing drivelines. The cutter is available for 540 or 1000 RPM tractors, with 4 or 6 tires in 3 sizes, and 5 hitch options. Standard equipment includes wing transport locks, transportation lights, and replaceable skid shoes. Also available as an RCG3712 model that offers a hot-dipped zinc galvanized deck.

FEATURES
GEARBOX WARRANTY
5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

3" CUTTING CAPACITY
These cutters offer 3" cutting capacity. See Operator's Manual for more information.

OPTIONAL LP PERFORMANCE HITCH
Clevis swivels two ways: Cutter can swivel clockwise and counterclockwise about tractor drawbar up to 12° in either direction.

ADJUSTABLE JACK ANGLE
Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS
LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES
Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

3/16" STUMP JUMPER
Standard 3/16" thick stump jumper material keeps damage to a minimum.

AVAILABLE COLORS
Tan, orange, red, yellow or green to match popular tractor lines.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Technical Data
Horsepower range hp (kW)
50 - 160 (37.3-119.3)
Gearbox horsepower hp (kW)
540 rpm or 1000 rpm | 160 (119.3) Divider | 130 (96.9) Center & Wings
Gearbox lubrication
Gear Lube 80-90W EP
Gearbox oil capacity
Splitter: 3.5 pints; Center deck & Wings: 6 pints
Cutting capacity inches (cm)
3 (7.6)
Machine total weight lbs. (kg)
3,730 (1691.9)
Drawbar vertical load lbs. (kg)
1,240 (562.5)
Blade tip speed at 540 rpm fpm (mps)
15,500 (78.7)
Blade tip speed at 1000 rpm fpm (mps)
15,700 (79.8)
Hitch types
Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch jack lbs. (kg)
Standard 7,000 (3175.1)
Signal lights
LED
7 Pin connector
SAE J560 pin configuration
Cutting width inches (m)
12'-0" (3.66)
Overall width inches (m)
12'-10" (3.91)
Transport width inches (m)
9’-4" (2.84)
Overall length inches (m)
15'-3" (4.65) With center deck raised fully up
Deck height inches (cm)
11 (27.9)
Cutting height inches (cm)
1-1/2 - 14 (3.8 - 35.6)
Lift hydraulics inches (cm)
3" x 8" (7.6 x 20.3) hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics inches (cm)
2 1/2 x 12 (6.4 x 30.5) hydraulic cylinders, hoses & fittings
Wing transport protection
Wing transport lock pins
Deck material thickness ga no (mm)
10 Gauge (3.4)
Side skirt thickness inches (mm)
1/4 (6) Steel
Skid shoes
Wing Deck: 1 Replaceable skid shoe per wing | Center Deck: 2 Replaceable skid shoes
Blades - 6 (2 per carrier) inches (mm)
1/2 x 4 (13 x 10.2) Heat-treated, free-swinging alloy steel with uplift
Blade overlap inches (cm)
6 (15.2)
Blade bolt
Keyed with hardened flat washer & locknut
Stump jumper / blade holder inches (mm)
3/16 (5) Thick round dish shaped pan, reinforced with | 1 x 4 (25 x 102) blade bar
Front & rear guards
Optional single row chain or dual row chain
Input driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Intermediate driveline
Standard - Category 4 with slip-clutch
Wing drivelines
Standard - Category 4 with slip-clutch
Wheel options
21" or 26" Laminated tires, 25.5" New foam filled tires, 25.5" New aircraft tires without foam filling, 24" Used aircraft tires
Number of wheels
4 - Wheel option: Two on transport axle and one on each wing axle
| 6 - Wheel option: Four on transport axle and one on each wing axle
Transport axle
Spring-cushioned on center transport axle
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Land Pride Performance hitch & Bar-Tite hitch pivot shaft diameter inches (cm)
2 1/4 (5.7)
A-frame tongue inches (cm)
5 x 3 (12.7 x 7.6) rectangular tubing
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate