2015 Land Pride RCF2760 Rotary Cutter

$3,409
Contact Information
Sales Department
Batavia, New York

Empire Tractor, Inc. - Batavia
Batavia, New York

See other Land Pride RCF2760s

Detailed Specifications
Stock #: B64346
Serial #: 900702

Seller Comments
LANDPRIDE RCF2760 ROTARY CUTTER-27 SERIES FLAT TOP 60" Front and rear chains The RCF27 Series Rotary Cutters is a smooth top version of our RCR26 Series, offering the same great cut and ideal for grass, weeds, crops, brush and small trees up to 3 inches in diameter. These units come equipped standard with a 3/16" thick heavy-duty stump jumper and replaceable bolt-on skid shoes. Optional shields are available for the front and rear. Features 1 1/2” Heavy-duty spindle on tailwheel Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. 1 1/2” to 12” Cutting height Provides for a wide range of cutting conditions. 1/2” x 4” Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life. 11 1/4” Deck Height - Allows cutter to handle heavy cutting conditions. 130 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications. 3/16” Plate stump jumper Standard round stump jumper slides over stumps, rocks and debris. 4” x 15” Solid rubber tailwheel Can’t go flat. 5 Year gearbox warranty Shows our confidence in the gearbox integrity. Box tubing deck supports Makes for a stronger rigid deck. Cat. 4 driveline with 4-plate slip-clutch Slip-clutch driveline offers convenience for continual work Fully welded deck Adds additional strength. Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life. Heavy 10 gauge deck construction with 1/4” side skits Can withstand more abuse than lighter gauge decks. High blade tip speed RCF2760 = 12,384 FPM - ensures clean cut. High cutting capacity Can cut brushy areas with saplings up to 3”. Laminated tailwheel Laminated material is long lasting in rough conditions Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design Round back design Helps discharge grass better than enclosed or partially enclosed cutters. Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall. Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. Transmission Driveline: ASAE Category 4 ; (Driveline Protection) 4 plate slip clutch Horsepower: (Recommeded Tractor PTO HP) 35-130 HP Dimensions Cutting Capacity: 3” Diameter Deck Height: (Bottom of Deck to Bottom of Skid Shoe) 11 1/4” Overall Length: 109” Overall Width: 67” Weight: 955 lbs. With front and rear Single Chain Guards General Information Blades: (2) 1/2” x 4" x 25” Heat treated alloy steel free-swinging high lift ; (Bolts) Keyed with harden flat washers & lock nuts. ; (Tip Speed) 12,384 FPM Cutting Height: 1 1/2” - 12” Cutting Width: 60” Deck Construction: All welded deck Deck: Material Thickness - 10 Gauge ; (Side Skirt Material Thickness) 1/4” Gear Box: 540 RPM PTO driven gearbox, 1:1.44 speed-up beveled gears, cast iron housing, 1 3/8”-6 spline input shaft and 2” output shaft Gear Box: Lubricant - EP 80-90W oil Gear Box: Oil Capacity - 7 pints Guard: (Rear) Single Chain Guard Hitch: Category l or II with floating top linkage, Quick Hitch adaptable Other: (Tailwheel) 4.00” x 8” x 15” Laminated tire with cast iron hub and tapered roller bearings ; (Mount Assembly) Welded A-arm and caster fork with 360 degree swivel Skid Shoe: (Construction) Replaceable bolt on skid shoes ; (Stump Jumper) 3/16” x 24” Round Pan Standard: Rear Guard Warranty: Overall Unit and Driveline: One year Parts and Labor/Gearbox: 5 years Parts and Labor/Blades, tires and driveline friction discs: Considered wear items (see complete Warranty Statement). Power Take-off (pto) PTO Speed: 540 RPMExpress Financing Get Pre-ApprovedGet a FR8Star Shipping Estimate

Dealership listing provided via