2016 Land Pride SSP1584 Loader and Skid Steer Attachment

$2,484
Contact Seller
Sales Department
Atlanta, New York

Atlanta, New York

Detailed Specifications
Stock #: A66425
Serial #: 1004565K

Seller Comments
Land Pride's SSP15 Snow Pushers are available in 3 popular sizes to fit your skid steer or tractor loader. The 15 Series is manufactured with a 30", 10 ga. moldboard and 1/4" side panels with 3 models available in 72", 84", and 96".All models come equipped with AR400 skid shoes that are, adjustable, reversible, and replaceable.



Land Pride Snow Pushers are designed to push snow straight ahead without leaving windrows or damaging the pavement below. The SSP mounts using the universal Quick-Attach plate and feature an 8” rubber wear edge. The rubber edge means Land Pride Snow Pushers eliminate damage to the pavement or lot striping on most surfaces while removing slush and snow.

Features
Universal quick attach hitch: Quick and easy to hook-up. Fits skid steers and tractor loaders with a universal quick attach hitch.
Hitch frame is angled forward: Allows operator to rotate front of Snow Pusher higher for pushing snow up a snow pile. Can build higher snow piles with this design.
1/4" & 5/16" Heavy side panels: Built heavy to handle the tough jobs.
Low profile exterior bracing on side panels and back: Reduces snow build-up on the moldboard and side panels. Reinforces side panels and back for a stronger unit.
1/4" Backing bar at blade mount: Makes for a strong moldboard.
Skid shoes are constructed of AR400 steel: Gives a greater wear life.
Z shaped steps: Allows snow to fall out of steps and helps prevent ice to build up.
Two year warranty: Built to last.
Reversible skid shoes: Skid shoes wear faster at the leading edge. Skid shoes that can be reversed will last longer than nonreversible skid shoes.
Replaceable skid shoes: Protects the side panels from wear.
Adjustable rubber snow blade: The blade can be adjusted down as it wears to extend its life.
Reversible rubber and steel blades: The blades can be reversed to extend their life.
Pull back with rubber blade: Used to pull snow away from garage doors.
Specifications
Working width: 84"
Capacity (Approximate): 39 ft3
Weight with rubber Blade: 562 lbs.
Horsepower range: 30-60 HP
Lift capacity of carrier: 2,000 lbs. Maximum
Operating weight of carrier: 5,000 lbs. Maximum
Hitch type: Universal Quick Attach Hitch
Non-slip steps: Serrated steps mounted on hitch
Skid Shoes: AR400 1/2" x 4" Reversible & replaceable
Moldboard thickness: 10 Ga.
Side panel thickness: 1/4"
Snow blades (Optional): 1" x 8" Rubber with adjusting slots. Reversible and replaceable blade
Steel blades (Optional): 1/2" x 6" Reversible and replaceable blades
Pull Back (Optional): 1" x 8" Rubber blade with adjusting slots. Blade is reversible and replaceable
Orange marker (Accessory): 28" Tall, bolts to the side panels
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate

Dealership listing provided via