Give Feedback
You must enter a search term to perform a search.

Don’t miss out on price changes!   Save a listing and automatically get emailed when there is a price change.

2010 John Deere 9670 STS Combine

Save


Key Specifications

Hours: 3424
Sep. Hours: 2503

Detailed Specifications

Stock #: 1068923
Serial #: 1H09670SAA0736635
Combine Type: Corn/Bean
Duals/Singles: Duals
Options: Contour Master (Lateral Tilt Feederhouse)
- Performance>> Corn and Soybean Customer > High yielding or high moisture corn>> Not recommended for use in small grains
- Premier Cab
- Contour-Master Feederhouse with Reverser and High-TorqueVariable Speed Drive System
- 3.15 In. (80 mm) Feederhouse Lift Cylinders
- Premium Header Control Package
- Round Bar Concave
- Deep Tooth Adjustable Chaffer and Bottom Sieve
- General Purpose Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Not available for Export)
- Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreader and Single-Point Adjustable Knife Bank
- Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System
- 520/85R38 155A8 R1 Radial (20.8R-38)Wide Spaced Duals for use in 30 In. Rows
- Adjustable Rear Axle with Heavy-Duty Spindles
- 480/85R26 140A8 R1 (18.4R26)
- Engine Coolant Heater - 110 Volt (Not available for Export)
- Clean Grain Auger and Fan Bottom Protection Shielding
- SideHill Performance Package
- Performance>> Corn and Soybean Customer > High yielding or high moisture corn>> Not recommended for use in small grains
- Premier Cab
- Contour-Master Feederhouse with Reverser and High-TorqueVariable Speed Drive System
- 3.15 In. (80 mm) Feederhouse Lift Cylinders
- Premium Header Control Package
- Round Bar Concave
- Deep Tooth Adjustable Chaffer and Bottom Sieve
- General Purpose Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Not available for Export)
- Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreader and Single-Point Adjustable Knife Bank
- Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System
- 520/85R38 155A8 R1 Radial (20.8R-38)Wide Spaced Duals for use in 30 In. Rows
- Adjustable Rear Axle with Heavy-Duty Spindles
- 480/85R26 140A8 R1 (18.4R26)
- Engine Coolant Heater - 110 Volt (Not available for Export)
- Clean Grain Auger and Fan Bottom Protection Shielding
- SideHill Performance Package
- CALL DREW 319-389-4876

Price History

Avg Auction (last 365 days)
Low
High
Current